Toggle navigation
Back
Log In
Home
Troubleshooting
Potter IntelliView™ Troubleshooting
IntelliGen™ Nitrogen Generator
Nitrogen Generator in Bypass Mode for 2 hours
Air Compressor is Continuously Running
Excessive Air Compressor Cycling
Excessive Membrane Run Time
Excessive Membrane Cycling
Nitrogen Generator Cannot Keep Up While in Nitrogen Generating Mode
Excess Nitrogen Demand
Maximum Temperature Limit Exceeded
Maintenance
Hardware Failure Detected
PLINK Connection Error
PLINK Device Trouble
Excessive Membrane Cycling
Issue:
Nitrogen Valves turn ON 15 times in 4 hours.
Probable Cause:
Leak on sprinkler system.
Leak on nitrogen tank.
Pressure settings need to be adjusted or pressure transducer replaced.
Membrane outlet solenoid is stuck open due to debris.