Toggle navigation
Back
Log In
Home
Troubleshooting
Potter IntelliView™ Troubleshooting
IntelliGen™ Nitrogen Generator
Nitrogen Generator in Bypass Mode for 2 hours
Air Compressor is Continuously Running
Excessive Air Compressor Cycling
Excessive Membrane Run Time
Excessive Membrane Cycling
Nitrogen Generator Cannot Keep Up While in Nitrogen Generating Mode
Excess Nitrogen Demand
Maximum Temperature Limit Exceeded
Maintenance
Hardware Failure Detected
PLINK Connection Error
PLINK Device Trouble
Nitrogen Generator Cannot Keep Up While in Nitrogen Generating Mode
Issue:
Bypass Solenoid cycles 12 times over 4 hours.
Probable Cause:
Filling multiple sprinkler systems.
Performing functionality testing on the nitrogen generator.
Leak on nitrogen generator or sprinkler system.